View and Download Bosch VMD01 M50 PAL operating instructions manual online. Security Sensors Bosch DMF 10 Zoom Operating Instructions Manual. Related Manuals for Bosch VMD01 M50 PAL. Security Sensors Bosch DMF 10 Zoom Operating Instructions Manual. Digital detector ( pages).
|Published (Last):||25 September 2018|
|PDF File Size:||4.45 Mb|
|ePub File Size:||13.64 Mb|
|Price:||Free* [*Free Regsitration Required]|
The battery can corrode or discharge itself over long periods. Once you have found the limits or the centre of an object, simply mark the sought after location through the marking opening 2.
En caso de no activarse ninguna tecla del aparato de medida durante aprox. Marking Objects Detected objects can be marked as required. fmf
Funktionen – Bosch VMD01 M50 PAL Operating Instructions Manual [Page 42]
Replace the felt pads when they are damaged or used. Ne pas enlever les glisseurs en feutre 8 se trouvant sur le dos de l’appareil de mesure. The illuminated ring 1 lights up red and a steady tone sounds as long as the measuring tool is over the wooden object.
Switching Off the Signal Tone The signal tone can be switched on and off. Ist das Messwerkzeug sehr nahe an der Leitung vier bzw.
The “Zoom” measuring indicator e is inactive when scanning for wooden objects. When the signal tone is switched off, the switched-off audio signal indicator j appears on the display. Insert the supplied battery. In this case, send in the measuring tool to an authorised Bosch after-sales service agent. If none of the measuring tool buttons are pressed for approx. The illuminated ring 1 lights up red and a steady tone sounds as long as the measuring tool is over the wooden object.
Switching Off the Signal Tone The signal tone can be switched on and off. We hope, that this document of instructions for use will help you. In all correspondence and spare parts orders, please always include the zomo article number given on the type plate of the measuring tool.
Betriebsarten Das Messwerkzeug detektiert Objekte unterhalb des Sensorbereiches 9. When switching the measuring tool on with the wood-detection button 5 or with the metal-detection button hosch, it will automatically be in the respective detection function.
For weak signals, the indication of the metal type is not possible.
For steel wire mesh, it is typical that the indicator bedienungsanleiung magnetic metals h is displayed directly above the rebar; the indicator for non-magnetic metals i is displayed between the rebars.
The “Zoom” measuring indicator e has the greatest amplitude over the centre of the metal object. When the measuring tool comes close to a metal bedienungsanlritung, then the amplitude of the measuring indicator f increases; when it moves away from the object, the amplitude decreases.
The trade names of the individual measuring tools may vary. As long as the measuring tool is above the metal object, the illuminated ring 1 lights up red and a boach tone sounds. Deposite el aparato de medida sobre la superficie a explorar. When having placed the measuring tool onto the surface to be scanned under which a wooden object is coincidentally located, and having moved it over the surface, the measuring bedienungsanleiutng f, the arrow below the “Zoom” function indicator d and the illuminated ring 1 flash red.
Bosch VMD01 M50 PAL Operating Instructions Manual: Funktionen
Operating temperature Storage temperature Battery Rechargeable battery Operating lifetime alkali-manganese batteries approx. Wires that are not “live” bksch be found as metal objects with the detecting-metal function.
Pay attention that the polarity is correct, according to the representation on the inside of the battery lid. When the battery indication k and the illuminated ring 1 red are flashing, measuring is no longer possible and the battery or the rechargeable battery respectively, must be replaced.
To open the battery lid 10, press the latch 12 in bedieungsanleitung direction of the arrow and fold up the battery lid. When very small or deeply embedded metal objects are being detected and the measuring indicator f does not react, press the “ZOOM” button 4 and keep it pressed while continuing to move the measuring tool over the area. The trade names of the individual measuring tools may vary. Store and transport the measuring tool only in the supplied protective case.
Switching On and Off B Before switching the measuring tool on, make sure that the sensor area 9 is not moist. During the scan, the felt pads 8 must always have contact with the structure.
If there are any metal inclusions in the material being scanned, then a continuous signal is indicated in the measuring indicator f. When a wooden object is detected, an amplitude is displayed in the measuring indicator f. It’s a community-based project which helps to repair anything. Do not dispose of measuring tools into household waste!
Observe only the zoom measuring indicator e for the scan. Spare Parts Protective beedienungsanleitung.
Bosch GMS 100 M Professional
Do not use cleaning agents or solvents. The battery can corrode or discharge itself over long periods. Intended Use The measuring tool is intended for the detection of metals ferrous and non-ferrous metals, e. Bei nichtmagnetischen Metallen wird das Symbol i angezeigt.